How Often Should Zerk Fittings On Lippert Trailair Pin Box Be Greased
My flex air has 6 grease fittings on. I have seen nowhere when and if I should be greasing them. And if so can too much grease be put in | The Lippert Trailair Tri-Glide Pin Box is the only Lippert Trailair Pin Box I am aware of with grease...
Is the B&W Patriot 5th Wheel Trailer Hitch Hard to Put Together
How difficult are these assemble for a common man that’s not real mechanical? I already have rails installed for it. | The B&W Patriot 5th Wheel Trailer Hitch part # BWRVK3255 is very easy to put together. In fact, I have created a video showing...
Troubleshooting Gooseneck/Fifth Wheel Wiring Harness On 2017 Ford F-350
i added the fifth wheel wiring harness to my 2017 ford f350 and it works great, except that the info system in the dash thinks the trailer is still plugged in and registers trailer miles and defaults to the towing screen every time i start the...
How To Grease Your Reese M5 5th Wheel Trailer Hitch
If I have a lube ring do I need to apply lube grease the the M5 20,000 lb. unit | The lube plate # RP83001 will do the job to keep your pin box from scraping as it slides onto the head of your Reese M5 5th Wheel Trailer Hitch # RP30922 but you...
How to Lubricate the B&W Companion Slider Part # BWRVK3400
does the slider need to be lubricated? | No, the slider on the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part # BWRVK3400 does not need to be lubed. The saddle, jaws, polyurethane bushings, and coupler surface are the...
Will Reese Replacement Weight Distribution Head # 58167 Work with My Existing 1200 lb Trunnion Bars?
Reese Replacement Head RP58167: Will this work with my existing 1200# Trunnion Bars #RP66009? | Yes, Reese Replacement Head # RP58167 will work with your existing 1200 lb Trunnion Bars, # RP66009. This replacement head includes the mounting...
TorkLift Trailer Hitch Receiver Needed To Use TorkLift SuperTruss Hitch Extension on 2017 Ford F-350
I have a 2017 F350 dually diesel with the factory hitch installed. I need to tow a 7,000 lb GVW trailer while carrying a pickup camper in the bed. I know I need the 48” supertruss extension but which hitch do I need? Can I use the existing hitch...
Is The Blaylock EZ-Jack Compatible With Triple Axle Trailers
Will this work on triple axel trailers? | The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK is not rated for use on triple axle trailers. We do not currently carry a drive-on wheel jack for triple axle trailers so you would...
Size of Torque Wrench Socket for Draw Tite Hitch Ball
You have to tighten the nut !! Draw-tite 63840 | In order to tighten the nut on Draw-Tite Hitch Ball # 63840 you can use a a 1-7/8 inch wrench or socket like the Powerbuilt ALL643216. This ball is 2-5/16" in diameter with a shank that measures...
Filter Your Search
Contact and Help